Sanding Surfaces for Brightwork
In getting the best out of an oil finish I will apply two soaking coats of oil as discussed before. My favorite is to sand
March 24, 2014
No Comments
In getting the best out of an oil finish I will apply two soaking coats of oil as discussed before. My favorite is to sand
Now that boating season is just around the corner I thought instead of being so technical I would say a good word about my friends
After all the sanding and polishing to the desired finish often I will apply a wax as not only a sealer but as a non
If you are interested in a satin finish requiring low maintenance then an oil finish is the way to go. After the penetrating oil for
From Jeff Puckett: By the way, I look and I look and your windows never leak a drop. Ever. Yes, you can quote me
We have already gotten to the point of having finished with the penetrating oil and letting it cure. The next step is to decide whether
Finishing teak will be discussed next after the applications of Ship N Shore. First the sealing coats must be dry. This is easily detected with
In preparing for oil finishes I use Daly’s Seafin “Ship N Shore” penetrating oil before any other finishing. After sanding I apply a soaking coat
While keyed and combination cam locks for entry ways with rotating arms for Companionway doors are popular none under a $100 wholesale cost are made